Shourt Line by Soft Works Ltd.
Model Railroad Products

Home & New Products

 

About Us

 

Products

 

Seminars

DCC101

DCC201

DCC301

 

Contact Us & How to Order

G Scale SL 5552412 1 Ch Switch Decoder 2 Mtr Drv 2 Sw inputs 2 Status outputs with wired LEDs, Nonvolatile Memory

G Scale SL 5552411 1 Ch Switch Decoder 2 Mtr Drv 2 Sw inputs 2 Status outputs, NO LEDs included, Nonvolatile Memory

Model SL 5552412 - Made in the USA USA Flag

1 Channel Switch Decoder - Drives 1 or 2 motors

G Scale SL 5552412 1 Ch Switch Decoder 2 Mtr Drv 2 Sw inputs 2 Status LEDs Nonvolatile Memory
Green and Yellow Status LEDs show switch position (track, switch motor and wires not included)

Any Scale 1 channel switch decoder, Perfect for G scale to control 1 or 2 switch motors from one decoder address.

Click here for more product details and larger photos

Set Features:

Each 1 channel switch decoder set comes with mounting bracket and screws with instructions for setting the switch address without programming. Drive 1 or 2 switch motors from any chosen switch address. The 2 LEDs indicate the switch position; Green for main line or straight, Yellow for siding or turning. Reversing the polarity of the switch motor wires reverses the LED color and switch positron set by the DCC switch command received.

  • High output drive current
    • drive 1 or two switch motors
  • Easy Install
    • Easy to mount in minutes
    • 2 screws included for mounting bracket
    • Weather resistant without plastic or rubber seals via a unique drain system for draining condensation or flooding.
  • Choose any switch address without Programming
    • Add a jumper to an address screw terminal and the next switch command sets the address.
  • 2 Aux switch inputs via screw terminals
    • Use the switch inputs with track contacts to avoid trains running switches backward or use the switch inputs for manual switch control remotely.
  • 2 LEDs show status of the switch
    • Green and Yellow LEDs show position of the switch.
  • Nonvolatile memory stores the switch position
    • Upon loss of power or on power up, the Green and Yellow LEDs show position of the switch.

How to install:

Step 1 Remove decoder case top and turn case upside down and wire track power to input screw terminals. Wire 1 or 2 switch motors to output screw terminals on the decoder board.

G Scale SL 5552412 1 Ch Switch Decoder 2 Mtr Drv 2 Sw inputs 2 Status LEDs Nonvolatile Memory

Step 2 Place cables on either side of the case to route the wires and replace the bottom. Place bottom in place as shown and turn decoder with the LED side (top) up.

G Scale SL 5552412 1 Ch Switch Decoder 2 Mtr Drv 2 Sw inputs 2 Status LEDs Nonvolatile Memory
(track, switch motor and wires not included)

Step 3 Mount the bracket using the included screws into the track opposite the switch motor using the mounting holes on all switch tracks.

Step 4 Place the switch decoder case in the mounting bracket. Note that the switch decoder will release from the mounting bracket if stepped on to avoid braking the ties.

G Scale SL 5552412 1 Ch Switch Decoder 2 Mtr Drv 2 Sw inputs 2 Status LEDs Nonvolatile Memory
(track, switch motor and wires not included)

Photos:

G Scale SL 5552412 1 Ch Switch Decoder 2 Mtr Drv 2 Sw inputs 2 Status LEDs Nonvolatile Memory
(track, switch motor and wires not included)

Click here for more product details and larger photos

Questions? Contact us by clicking on the link above

Thanks for looking - Shourt Line by Soft Works Ltd.

copyright 2024 ShourtLine.com Soft Works Ltd. all rights reserved